miercuri, 25 martie 2015

TUTORIAL - Easter Eggs from Polymer Clay

TUTORIAL
Easter Eggs from Polymer Clay


The following materials are required:
- polymer clay with cold drying
- varnish for polymer clay
- wire
- glue
- nail polish in various shades of red
- paper ornamental napkin with a model
- white ribbon
The following tools are required:
- a brush
- a pincer
- a pliers for wire bending
- a pliers for wire cutting
- scissors


At first, we create the shape for the egg, from polymer clay, at around 2 cm in length, and then we add a little ring, made from wire, from which the ribbon will be tied.

After all the eggs are dried at room temperature, in about one day, they are varnished (with the varnish for polymer clay), for increasing their durability, and again left to dry.

They are then varnished with nail polish (or painted in acrylic tones or in oil, depending on preference). To facilitate the painting operation, we used a hook on the eggs, hanging them from the wire ring of the eggs and a clothesline, because they could be painted quickly and evenly.

After drying, we stuck on the eggs, with glue and with the help of the pincer, one or two small ornamental patterns cut from the ornamental paper napkin and then we tied them with a white ribbon.

These ornamental eggs can decorate the traditional Easter festive table, they can be offered attached to gifts or to flower bouquets, they can also be used as ornaments inside the house or in window shops during Easter celebration.
I created all these ornamental eggs to decorate the traditional Easter dinner table.

TUTORIAL
Oua ornamentale de Paste din lut polimeric
Materiale folosite:
- lut polimeric cu uscare la rece
- lac pentru marirea rezistentei dupa uscare
- sarma
- aracet
- lac de unghii in diferite nuante de culoare rosie
- servetel de hartie ornamental cu model
- pamblica alba
Unelte folosite:
- pensula
- penseta
- cleste de indoit sarma
- cleste de taiat sarma
- foarfeca

La inceput se modeleaza formele de ou din lut polimeric, de aproximativ 2 cm lungime, si se adauga un mic inel, facut din sarma, pe care se va prinde pamblica.
Dupa ce oualele se usuca la temperatura camerei, in aproximativ o zi, se dau cu lac pentru lut polimeric pentru marirea rezistentei si se lasa din nou la uscat.
-
Se dau apoi cu lac de unghii (sau se vopsesc cu culori acrilice sau culori cu ulei, dupa preferinta). Pentru usurarea operatiei de vopsit, le-am prins cu cate un carlig, de micul inel de sarma, pe o sarma de rufe pentru a putea fi vopsite mai repede si uniform.
-
Dupa ce s-au uscat, am lipit pe oua, cu aracet si cu ajutorul pensetei, cate unul sau doua modele decupate din servetelul ornamental de hartie si apoi le-am legat cu cate o pamblica alba.
-
Aceste oua ornamentale pot impodobi masa traditionala de Paste, se pot atasa la un cadou sau la un buchet de flori sau pot impodobi casa sau o vitrina de magazin in perioada sarbatorilor de Paste.
Toate aceste oua ornamentale le-am facut pentru a impodobi masa traditionala de Paste.
My  TUTORIAL like as
Tutorial - Polymer Clay Easter Egg Decorations
is published on
Totally Tutorials


and my  TUTORIAL like as
 is published on
favecrafts.com

If you are using my tutorial in your projects,
please specify the source of the tutorial. 
Thank you.
-
Daca folositi tutorialul meu in proiectele dvs.
va rog sa specificati pe blogul dvs. sursa tutorialului.
Va multumesc.


This
TUTORIAL

"Easter Eggs from Polymer Clay"
will be entered in the following Link Parties:
 
Wooden Eggs
http://9gag.com/gag/aZxnWP6
 Source: 9GAG - Bunny with big eyes
 






You might also like:
 TUTORIAL

6 comentarii:

  1. Sunt foarte frumoase ouale rosii, iar combinatia cu alb e preferata mea. Foarte ingenioasa idee. Multumesc mult pentru vizita!

    RăspundețiȘtergere
    Răspunsuri
    1. Multumesc Kiddo si ma bucur ca ai revenit si tu pe blogul tau.

      Ștergere